Periodic Table Shawl Knit with Updated Elements

Let me say right off that I am using the chart so kindly posted by Apinnick for her Periodic Table Sweater. My background is in Biochemistry and I love Chemistry. This sweater grabbed my attention immediately, especially since I used to wear a yellow periodic table T-shirt in high school. (long term geek that I am)

Instead of a sweater, I am making a flat shawl/throw in worsted weight cotton yarn. I chose this yarn because I've had a couple of CONES of the stuff sitting around since 2006, driving me nuts. The numerical description of the background is at least 120 stitches by at least 215 rows. Note that I am doing this SIDEWAYS. The sideways orientation fits my knitting frame and my (im)patience level. I would have gone bonkers knitting this by hand right now. I have other stuff to finish on a deadline.

I chose to knit the background in stockinette stitch on a Bond knitting frame. I knit 11 rows of white, then 1 row of (blue-green) contrast yarn. The contrast yarn helps me define the squares of the Table and serves as a counting device. Also, when complete, I want the background to evoke the idea of "notebook paper" and "graph paper". Besides, that, it was in my stash.......

So far, I have knit the background. I have not bound off the edges because I will hand knit some sort of edging later. I'm considering stitch patterns, etc.

I'm doing the actual elements in duplicate stitch, rather than knitting them in with the background. As I go, I'm making decisions about color and arrangement. (That means digging up stash yarn).

Important Note: The original Periodic Table Sweater was made in the late 1990's. There have been a number of new elements that have been discovered/ approved since then. IUPAC (International Union of Pure and Applied Chemistry) has approved names for some of these elements and had temporary names for others. I am going to make (and post) a chart for some of the updated elements. Also, there are a few variations on the arrangement of the Periodic Table. My version will be slightly different from Apinnick's version. The new elements get added and the actinoids and lanthanoids are slightly different. Here is a version of the Periodic Table that shows the new elements, starting from the Atomic Number 104.

Pink Beanie, Decidedly Delicate

What I'm working on right now. The pattern is from Ravelry, called Decidedly Delicate. It has an easy 4 row pattern repeat. I'm making two hats, one each on size 8 and size 9 circular or double point needles. Nice, fun, mindless knitting. I'm making the hats for two girls, one will be turning 9 soon and one who will be somewhat older. The pink yarn is a departure for me, but I like it. It was chosen by one of the (future) gift recipients.
Stiil playing with trim. One girl wants a bow. The first hat has a crocheted flower trim,- my call. We will see about the bow.....

Jellyfish I

These photos are what I have at the moment. The jellyfish could be considered complete, but I think additional tentacles are needed. I need to give it a good long stare in a dark room (it glows). Then I will try out tentacles and various accents in s "glow", pink, or clear cord. The clear cord is being reserved for a transparent knit first. These photos were taken with the unwilling cooperation of two surly teenagers who specified they be edited out.



















Details: This was knit using two skeins of Bernat "Glow in the dark" Yarn in white. I used size 7 needles, both double point and a 24" circular. For the body, I cast on 174 stitches on the double point needles and did 10 paired decreased evenly around the circle every other row. Then i closed the center. The tentacles were formed from a long (6-7 foot) length of ruffle. I knit this by filling a 24" circular needle with stitches. I knit a row, then formed a double increase in each stitch, to form the frill. I knit for about 1.5 inches in garter stitch and bound off the ruffle.
Assembly: Weave a length of yarn around the edge of the circle leaving long ends, to form a drawstring. Use the drawstring to pull the edge of the circle in until the shape is pleasing. Stuff the bell if you like. The ruffled strip was folded into quarters and attached to the body. I also used a cardboard circle to hold in the stuffing. For now, the tentacles are tied to the cardboard circle. They may be attached directly to the body once I finalize the shape a add additonal tentacles or accents.

Barcode Knit Complete

Music-themed scarf/iPod cozy.

Vital stats:

Needle size: 2, one set straight, one set double pointed
Yarn: sock weight
Gauge: 6 stitche per inch, 8 rows per inch
Total number of stitches in project, 13,382, (31 stitches per round)


Here is what I learned.

Barcode is truly a machine language. I took the name "bellflur" (after the band) and used an online converter to translate it into Code 128. It looks really good on paper. Great visual, nice stripes. I enlarged the printout so I could see and count each row of pixels. Very simple. Stripes are easy to knit?

WRONG.

In barcode, each number translates into rows of pixels. The number 1 is a single row, the number 3 is three rows. Code 128 does the same for letters. This allows a lot of information to be printed in a small amount of space, such as a label.

In knitting, this greatly expands the project. If you look at the photo of the scarf, you will see that the letters take up less space than the stripes of the code. In addition, in knitting there is the issue of color changes and weaving in ends. I carried the yarn up the sides to avoid having over 100 loose ends to weave. A final consideration with knitting is changing colors on odd or even numbers of rows. In flat knitting, it is easiest to change colors every two rows. Originally, I tried to expand the barcode so that one row of pixels equalled a two-row stripe. That gave me a pattern repeat in the range of 250-300 rows. Eventually, I chose to knit the scarf in the round, to facillitate frequent colr changes of one-row stripes. I knit the scarf as a closed-end, double knit tube to make it more interesting for myself. After knitting about 6 inches of the pattern, I decided to use the tube to hold my iPod or cellphone, leaving an opening that was later bordered in 1x1 ribbing.

After the barcode portion was completed, I knit the remainder of the scarf in plain black. This portion was knit on double pointed needles and I just knit until I used up nearly all of the black yarn. The final length is 55 inches, which is rather short for a winter scarf, but just right for holding my ipod at a comfortable level.

The last step in the main scarf was to duplicate stitch the name "bellflur" on the solid portion of the scarf. I used chart that I made some time ago. The chart was made from the band's logo that I charted using KnitPro and then altered to get the effect I wanted. I found it frustrating to duplicate stitch black yarn, at a small gauge, in a long, narrow, tube.

The final steps were to bind off the knitting and add fringe. The loose ends were tucked inside the scarf.

I am SO glad this thing is done. This project had an idea that I loved. I hated the execution. If I do another barcode project, I will choose a different yarn and perhaps knit it using a knitting machine, flat. I will definitely do it at a much larger guage. I fit the project to use the yarn I had available in black and white. I may try another version of barcode, called AZTEC next because it appears to be graphically intersting.

Jelly fish

The photo shows jellyfish, "moon jellies", my current model and inspiration. Jellyfish, invertebrates and bioluminescence have been interests of mine for years. I want to do something that has a passing resemblance to the real creature. I don't like cutesy, anthropomorhic versions with faces.
I started out trying to use some of my stash of glow yarn, but it wasn't right. I want to get something that is truly transparent or at least translucent. I've tried knitting strips of thin clear plastic from the dry cleaners. It was just awful, soft slippery, sticky at the wrong time, very frustrating. Besides that, at the end of the evening, my husband was making comments about my "descent into madness". Next morning, the plastic went into the trash. I went out and purchased two thicknesses of nylon monofilament fishing line to try. It is knittable. I am trying to find a tolerable way to start this project. Once established, it should work well. I will get the transparency I want and will use glow-in-the-dark yarn for the luminous parts.

Aberration, Anniversary, Independence

This is the one year anniversary of this blog. The embarrassing photo at left is Penguin, a "retired" feral cat who adopted us a couple years ago. Today I gave him cause to re-think that decision. I saw the blogpost about International Cat Hats, some time ago and just loved it. Normally, I don't humiliate the cats or make demands on them. They are independent contractors. This was the exception. I knit the crown overnight and got photos today. The photo part was hard. My husband is not a photographer and certainly not for cats. This was the best I could get. There was another photo shoot, with my cat, Raven, that was an unmitigated, blurry disaster. If my husband had shot video, it would have been fun. As it is, neither cat is speaking to me.

Barcode Section Knit- Update Bellflur

Confession....I have been "socializing" on Facebook and not knitting. Anyway, I'm back to the knit at least for a while. Bellflur is hitting the road for their summer season AND they will finally be releasing new songs. I want to get this project finished before the EP and Album are released.

This project started out as a simple barcode experiment. Along the way, I realized that I could use this narrow scarf/stole to hold my iPod. The barcode portion was knit in tubular double knitting. The remainder of the scarf will be knit in plain black until it is long enough, or I run out of yarn. I am finishing it on double point needles because knitting on black yarn in dim light made for some .......unravelling. Now I can just knit on circular auto pilot.

The last step will probably be to embroider the title "Bellflur" on the black portion.

If you look carefully at the iPod, you can see the cover of the first Bellflur CD.